RACKS & ROLL CAGES Coming Soon... DA3801 DA3802 DA3807 DA3801 Coming Soon... DA3802 Coming Soon... DA3807 Coming Soon... Safety Devices Stepped Non-Winch Front Bumper Safety Devices Stepped Non-Winch Steering Guard Safety Devices Tubular Side Step/Rock Slider Defender - 1983 - 2016 Defender - 1983 - 2016 Defender - 110 Station Wagon - 2007 - 2016 Constructed from 3mm steel plate and finished in a durable Powder coated steel mounting brackets and aluminium Designed to be a direct replacement for the OEM side steps. zinc-based powder coat, this bumper is a direct fit replacement steering guard plate. Can only be fitted when Safety DevicesThe mount to both the existing OEM mounts under the sill as for your Defender. Can be installed to both air-con and Stepped Non-Winch Front Bumper (DA3801) has been well as additional chassis mounts. Features a removable toe non-air-con vehicles, and no modification of the grille or the installed. rail assembly. OEM jacking points is required. DA3803 DA3804 DA2985 DA3803 Coming Soon... DA3804 Coming Soon... Safety Devices Roll Cage Mounted Raised Air Intake Safety Devices Stepped Winch Front Bumper Safety Devices Stepped Winch Steering Guard Defender - 1987 - 2016 Defender - 1983 - 2016 Defender - 1983 - 2016 3” diameter stainless steel snorkel, designed for use with Safe- Constructed from 3 & 5mm steel plate and finished in a Powder coated steel mounting brackets and aluminium ty Devices roll cages as listed. Includes anodised aluminium durable zinc-based powder coat, this bumper provides steering guard plate. Can only be fitted when Safety Devices clamp to mount to roll cage. the option to install a variety of different winches using the Stepped Winch Front Bumper (DA3803) has been installed. Note - Excludes 3” raised air intake head. mounting dimensions are 254 x 114.5mm (10” x 4.5”). There DA2985 are also 2 x recovery shackle mounts (23mm hole) along with Right hand side cage mount an opening for a standard 255mm hole centre fairlead to be Fits the following Safety Devices roll cages - installed. Can be installed to both air-con and non-air-con L108, L172, L185, L190, L213, L227, L242, L243, L247, L249, Defenders, although the grille may need to be modified on an L258, L259 &L260 air-con model, depending on the winch installed. The OEM DA3808 Coming Soon... chassis jacking points must be removed from the end of the Left hand side cage mount chassis legs to allow the bumper to fit. Fits the following Safety Devices roll cages - L108, L138, L172, L185, L188, L190, L213, L227, L242, L243, L247, L249, L250, L258, L259, L260, L299, L308, L310 & L316 DA3811 DA3810 DA3809 DA3811 Coming Soon... DA3810 Coming Soon... DA3809 Coming Soon... Safety Devices Fixed Spare Wheel Carrier Safety Devices Lift-up Spare Wheel Carrier Safety Devices Swing-Away Spare Wheel Carrier Defender - 110 Double Cab - 1983 - 2016 Defender - 110 Double Cab - 1983 - 2016 Defender - Station Wagon & Hard Top - 1983 - 2016 Rear load bed spare wheel carrier, capable of supporting a Rear load bed spare wheel carrier featuring lift-up operation Rear door and body mounted spare wheel carrier, complete 35” tyre. Also features an adjustable length wheel centre to powered by gas rams either side, capable of supporting a with adjustment for a wide variety of different wheel diameters suit different tyres and wheel offsets. Mounts to roll cage with 35” tyre. Also features an adjustable length wheel centre to and offsets. The body mounts are polyurethane mounted aluminium clamps (included). This is only for mounting with suit different tyres and wheel offsets. Mounts to roll cage with to dampen vibrations. The opening of the rear door may be Safety Devices RBL185 7SSS & RBL243 7SSS roll cages. aluminium clamps (included) and the rear floor of the vehicle. limited if oversized tyres are used. This is only for mounting with Safety Devices RBL185 7SSS & RBL243 7SSS roll cages. Photo by Sarah Hamblin 48