SEATS & TRIM Trim Rear Window Surrounds DA2932 DA2935 DA1644 Defender 90 Defender 90 These rear window surrounds will fit all versions of the 90, With window cut-out Without window cut-out however, if the vehicle has a higher bulk head, the fitter will DA1643 Black DA1644 Black need to remove a section of the surround which is clearly DA2933 Dark Grey DA2935 Dark Grey marked with a witness line on the inside of the moulding. This DA2932 Light Grey DA2934 Light Grey can be done very easily with a ‘Stanley’ knife or similar. DA3842 DA3843 DA3844 Defender 110 - 1987 - 2006* Defender 110 - 1987 - 2006* *Can be fitted to Defenders up to 2007 with adaption of seat Defender 110 - 2007 - 2016 Defender 110 - 2007 - 2016 belt anchor brackets - LR012450 & LR012451 - not supplied. With window cut-out Without window cut-out Not suitable for side facing seats. DA3842 NEW Black DA3845 NEW Black DA3843 NEW Dark Grey DA3846 NEW Dark Grey DA3844 NEW Light Grey DA3847 NEW Light Grey Seat Box Protectors DA7370 Brushed Stainless Steel DA7371 Black steel Defender Pair The edge of the Defender seat box is prone to damage, protect that edge and smarten up your interior with these protectors. Made from 2mm steel. Less than 5 minutes to fit and all you need is a drill for the fixings. Kit includes a pair of corner protectors and 8 x 19mm flanged steel self drill fixings. These will also fit a Series 2 & 3 but will require matching drilling to accommodate seat rail fixing. Photo by Mark McCorquodale 114