EXTERIOR PROTECTION Rear Protection Bumpers & Bumperettes DA5647 DA5646 Added protection... DA5647 DA5646 Discovery 1 - 300Tdi - will also fit 200Tdi. See note below. Discovery 2 > One piece rear heavy-duty bumper manufactured from 5mm steel with incorporated steel > One piece rear heavy-duty bumper manufactured from 4mm steel with incorporated steel end caps end caps, finished in black > Finished in black > 2 Recovery points and 2 Hi-Lift jacking points included > Provision for NATO/recovery point in centre of bumper > Fixed to standard mounting points and for added strength, extra fixings in centre where tow > Fixed to standard mounting points and for added strength, extra fixings in centre where tow bar mounts bar mounts Note - Tow bar and rear lights not included. Note - Tow bar and rear lights not included. Will fit 200Tdi if 300Tdi lights are used. Up to 3A771194 - Right light - XFB101480 / Left light - XFB101490 Right light - AMR6510; left light - AMR6509 From 3A771195 - Right light - XFB000720 / Left light - XFB000730 DA5647KIT DA5646KIT Replacement fitting kit for heavy-duty bumper DA5647 Replacement fitting kit for heavy-duty bumper DA5646 DA2071 Defender / Series Rear bumperettes Pair Black DA5647KIT DA5646KIT DQN500040 Defender 110 - Hi-Cap / Defender 130 - Hi-Cap Rear stop bump Single - RHS Black DQN500050 Defender 110 - Hi-Cap / Defender 130- Hi-Cap Rear stop bump Single - LHS Black RRC2970 Defender/ Series Rear bumperette Single - RHS Black RRC2971 Defender/ Series Rear bumperette Single - LHS Black ISG000040 Defender Wolf Rear bumperette Single - RHS Black ISG000050 Defender Wolf Rear bumperette Single - LHS Black DA2071 ISG000040 RRC2970 RRC2971 DQN500040 ISG000050 Replacement Surround Cameras LR052028LR Front bumper Tailgate Side view mirrors Discovery 4 Range Rover Evoque - 2012 - 2018 Range Rover Sport - 2014 - 2022 Range Rover - 2013 - 2022 Photo by Matt Unsworth Parking Sensor Kit DA4511 These bumper* mounted sensors will detect the distance between your vehicle and any rear obstruction and warn the driver to any potential obstructions. An advanced parking solution for obstacle detection at the rear of your vehicle. Reduce the risk of collision during reversing and reverse parking manoeuvres with this kit. As the reverse gear is engaged, a sound indicates that the reverse sensors are activated. Any obstacle at the rear of the vehicle is then detected and signalled to the driver through a progressive sound whose frequency increases when moving closer to the obstacle. Enhance your safety through obstacle detection, even when objects are out of the driver’s field of vision. Improve comfort through easy parking manoeuvres. Suitable for 12v cars, SUVs and light commercial vehicles. Kit contents include - 4 x Bumper fit sensors 1 x Warning buzzer Add an extra set of 1 x Control unit 1 x Wiring harness ‘eyes’ when reversing... 1 x Cutting tool 1 x Fitting accessories 1 x Installation instructions *Note- Not suitable for vehicles with metal bumpers. 18