CHASSIS & BODY Chassis Chassis - Richards DA2056 Defender 90 Nat. asp./ 2.5 Td & petrol/200Tdi Richards Chassis DA2056-300TDI Defender 90 300Tdi All Richards chassis are manufactured in the UK, using locally sourced materials and locally KVD500710 Defender 90 Td5 based machine shops. They are located close to the steel city, Sheffield, and therefore DA8906 Defender 90 2007 - 2016 optimise the use of local steel, ensuring that all their chassis are formed from 2.5mm British DA2057* Defender 110 Nat. asp./2.5 Td/200Tdi steel which are all galvanised as standard. All profiling is done ‘in house’ using their own DA2057-300TDI* Defender 110 300Tdi laser machine, enabling them to have greater control over the quality of parts used and the KVD500730 Defender 110 Td5 materials that they are formed from. The chassis are made using 2.5mm side rails which DA8907 Defender 110 2007 - 2016 are 25% heavier than the standard 2.0mm rails. Overall this gives a small increase in the DA8900 Discovery 2 Td5 - RHD - up to 3A vehicle weight but has a massive effect on the long term durability of the chassis. Bolt on DA8901 Discovery 2 Td5 - RHD - from 3A crossmembers are not supplied with Richards chassis but are available separately - see NRC4642G Series 3 - SWB Uniframe chassis DA5300. NRC4356 Series 3 - LWB 4-door 4-cylinder Station Wagon DA5300 Defender 90 / 110 - excludes 300Tdi Bolt on crossmember More pictures online at - galvanised with fittings www.britpart.com/chassis *Suitable for pick-up & station wagons DA8907 KVD500710 DA5300 DA8900 Important This is a selection of the chassis’ that we do. Please enquire if the chassis you require is not listed here. 226