CHASSIS & BODY Chassis Chassis - Marsland NRC4642G-M Series 2A / Series 3 - SWB 4-cylinder Marsland Chassis DA2056-M Defender 90 Nat. asp./2.5 Td & petrol/200Tdi The Marsland Defender chassis manufactured by GKN Wheels & Structures, supplied with an DA2056-300TDI-M Defender 90 300Tdi insurance accepted GKN Certificate of Authenticity confirming the chassis are constructed KVD500710-M Defender 90 Td5 using “the same materials, processes and quality control techniques as were stipulated at DA8906-M Defender 90 2007 - 2016 the time of original equipment manufacturer”. Type approved and crash tested. All Defender DA2057-300TDI-M Defender 110 300Tdi chassis are built to 2016 type/latest specification, including rear cross member and A-frame KVD500730-M Defender 110 Td5 cross member. GKN pressed ‘C’ section main legs/rails made from 2mm steel with 3mm DA8907-M Defender 110 2007 - 2016 stiffeners fitted and spot welded internally for added strength, effectively giving you 5mm of DA5300 Defender 90 / 110 - excludes 300Tdi material where most needed. Chassis supplied with bolt in gearbox cross member, rear cross Bolt on crossmember - galvanised with fittings member to body bracket, A-frame to chassis bushes including fixings. Power steering pipe, fuel filter, fuel tank and fuel line riv nuts fitted to chassis. All holes drilled and tapped excluding rear tow pack holes. Galvanised as standard. More pictures online at www.britpart.com/chassis DA2056-M DA2056-300TDI-M DA5300 KVD001010-M Marsland Adaptor Chassis Defender 90 - with rear fuel tank and engine Chassis blank with threaded plates for conversion engine conversions. OEM manufactured with KVD001010-M Defender 90 NAS - with engine conversion hot dipped galvanized finish. Replacement Note - Requires 5 weld nuts per engine for Defender variants with a rear mounted mount. Use 10 x Flange bolt FS108207L. plastic fuel tank. Chassis features the latest Puma updates with reinforced main rails, upgraded bulkhead outriggers and rear cross member with integral fixing nuts for tow plate and recessed mounting point for towing plug. Features the latest Puma updates... KVD001010-M Designed and manufactured to accept multiple types of engines. Instead of welded on motor mounts, this chassis has double plated sections with weld nuts for bolt on motor mounts, making it the perfect choice KVD001030-M for all types of engine conversions. Includes Defender 110 - plastic fuel tank with alternative engine bolt-on flat gearbox cross member. Made in Galvanized top tank strap and galvanized fuel tank protection plate. the UK. Note - Requires 5 weld nuts per engine mount. Use 10 x Flange bolt FS108207L Chassis - Rear Half DA6648 DA6668 DA6670 DA2099 Series 2 & 3 - SWB DA6648 Defender 90 200Tdi & 300Tdi DA2099 DA6669 Defender 110 200Tdi & 300Tdi DA6668 Defender 90 Td5 & Puma DA6670 Defender 110 Td5 & Puma DA2565 Discovery 2 DA8903 Discovery 2 - ¼ chassis DA6669 227