RACKS & ROLL CAGES Safety Devices DA3565 NEW Roof Rack Defender 110 & 110 Hard Top - 2020 onwards Roof rack assembly complete with wind deflector bib. Requires the installation of roof rails (VPLER0177) to allow fitment. No modification to the vehicle is required and the rack does not obscure the rear-view camera. Top of rack is 125mm above roof skin, measured directly behind the rear-view camera. Provides clearance for the panoramic sunroof to both tilt and open fully. The roof rack is compatible with the access ladder and accessory rack. DA3566 NEW Access Ladder Defender 90 & 90 Hard Top - 2020 onwards Defender 110 & 110 Hard Top - 2020 onwards Defender 130 - 2020 onwards Roof access ladder that can be fitted to either side of the vehicle. It can be installed standalone or in conjunction with the Safety Devices Roof Rack Assembly. Made of a folding construction with dual securing methods and a key locking mechanism. Requires drilling of the trim panels below the rear window to allow installation into the existing body mounts beneath. When deployed, the height from the floor to the lowest step of the ladder is 585mm at normal ride height (660mm at max and 550mm at min). DA3567 NEW Side Steps Defender 110 & 110 Hard Top - 2020 onwards Defender 130 - 2020 onwards Side steps and toe rail kit with non-slip tape and stainless-steel infill plates. Designed to mount on existing mounts within the sill. The plastic sill covers will require slight modification to allow access to the mounting points. Supplied with an adapter to allow the OEM jack to be used. Note - Kick rail not shown in drawing. DA3568 NEW Accessory Rack Defender 90 & 90 Hard Top - 2020 onwards Defender 110 & 110 Hard Top - 2020 onwards Defender 130 - 2020 onwards Multi-purpose accessory mount that can be fitted to either side of the vehicle. It can be installed standalone or in conjunction with the Safety Devices Roof Rack Assembly. Features mounting rails along upper and lower sides along with 4 x tie down points. Requires drilling of the trim panels below the rear window to allow installation into the existing body mounts beneath. DA3569 NEW Spare Wheel Cradle Defender 90 & 90 Hard Top - 2020 onwards Defender 110 & 110 Hard Top - 2020 onwards Defender 130 - 2020 onwards Designed to work with the existing spare wheel carrier as a cradle to rest the wheel on whilst attaching with bolts. Uses existing mounts in the rear door with no modifications required. DA3570 NEW Spare Wheel Cradle & Off Road/Trail Jack Mount Defender 90 & 90 Hard Top - 2020 onwards Defender 110 & 110 Hard Top - 2020 onwards Defender 130 - 2020 onwards Designed to work with the existing spare wheel carrier as a cradle to rest the wheel on whilst attaching with bolts. Uses existing mounts in the rear door with no modifications required. Also provides the provision to mount an Off Road/ Trail Jack in a vertical orientation. 48