EXTERIOR PROTECTION Underside Protection Fuel Tank, Steering/Sump & Transmission Guards DA5507 DA5508 DA7530 DA7535 DA7536 / DA7532 DA5625 DA5625 Sump Guards These guards from Britpart are manufactured from high-quality, hard-wearing and corrosion resistant materials to counteract any unforeseen obstacles your Land Rover may encounter whilst off-roading. All fixings are supplied and the guards fit into the vehicle’s pre-existing holes. Each guard has holes at the front to allow for water drainage and also to help with ventilation for the cooling system. DA55 07 Defender - 1985 -2006 & 2007 onwards Aluminium RHD Main plate - 8mm thick; brackets - 8mm thick DA5507LHD Defender - 1985 -2006 & 2007 onwards Aluminium LHD Main plate - 8mm thick; brackets - 8mm thick DA5507KIT Spare fitting kit for DA5507 & DA5507LHD - nuts, bolts & washers VPLE P0436LR Defender 2020 - 90 & 110 Aluminium Robust, 5mm anodised aluminium. Protects lower bumper area and radiator when driving off-road. The undershield is also reinforcedby the mounting assembly which enhances the protection. Allows easy access to the recovery loop which facilitates recovery of the vehicle if grounded. DA55 08 Discovery 1/Range Rover Classic Aluminium RHD & LHD Main plate - 8mm thick; brackets - 8mm thick VPLEP0436LR DA2249 Discovery 2 Powered coated steel RHD & LHD Main plate - 5mm thick; brackets - 5mm thick. Note - For use with Discovery 2 winch bumper DA5645 An essential purchase for any off road use as they prevent damage to the underside of the engine and the intercooler at the front of the vehicle. Manufactured from 8mm 5083 aluminium with a smart silver or black finish and supplied completely machined and drilled ready to bolt directly to the 4 pre-drilled holes in the chassis with supplied galvanised fixings. The guard requires no additional drilling just unscrewing and unclipping of the plastic OEM parts. Fitting should take 5 minutes. DA75 30 Discovery 3 Silver finish DA7530B Discovery 3 Black finish DA75 35 Discovery 4 Silver finish DA75 35B Discovery 4 Black finish Great Protectionfrom Hidden Dangers! Sump Plate DA75 36 Discovery 3 This sump plate protects the underside of the engine and allows the car to slide over objects, forward and backwards due to DA5507LHD the rear lip. With a natural finish the plate is made from 6mm 5083 grade aluminium and has been water jet cut to a precise finish. Plate bolts directly into existing holes and bulkheads already in the chassis, using the standard Land Rover fixings. Transmission Guards DA5625 Defender - Td5 Reduce damage to your Defender 90. Made from galvanised steel, this transmission guard protects your 90’s gear box and cross members from snagging and reduces damage to your vehicle. Bolts on and is easy to fit and importantly it is also easy to remove when your vehicle needs servicing. Note - Only fits with centre exhaust removed and pipe fitted. DA75 32 Discovery 3 This transmission plate protects the underside of the transmission and allows the car to slide over objects. With a natural finish the plate is made from 6mm 5083 grade aluminium and water jet cut to a precise finish. Plate bolts directly into existing holes and bulkheads already in the chassis, using the standard Land Rover fixings and two additional fixings. Note - Can only be fitted when sump plate (DA7536) is also fitted. Fuel Tank Guards Protect your Defender’s fuel tank. Manufactured from 6mm aluminium. DA65 38 Defender 90 - Td5 & 2007 onwards DA6539 Defender 110 - Td5 & 2007 onwards DA2249 DA7530B DA6538 DA6539 22