TOOLS Timing Tools DA1115 Timing Kit DA1120 Freelander 2 - 2.2 diesel Flywheel Range Rover Evoque - 2.2 diesel DA1116 Land Rover tool part numbers - Timing Kit Locking 303-1277 - Camshaft pulley timing pin Discovery 3 - 4.4 V8 - from 2005 Tools & Camshaft Range Rover Sport - 4.2 V8 Supercharged - Timing Pins DA1121 303-1270/303-1059 - Flywheel locking Discovery 3 - 2.7 TdV6 Timing Kit timing pin up to 2010 & 4.4 V8 up to 2010 Range Rover L322 - 4.2 V8 Supercharged - Discovery 4 - 3.0 TdV6 Land Rover KV6 engines 303-1272 - Flywheel/ring gear locking tool Range Rover Sport - 2.7 & 3.0 TdV6 The Land Rover KV6 quad cam engine adaptor 2005 - 2010 & 4.4 V8 - 2005 - 2010 Jaguar 4.2 & 4.4 V8 engines with codes 4PN has one front and two rear camshafts and & 428PS these tools cover the replacement of all three belts LRT-12-158 DA3140 DA6120 Timing Kit Fuel Pump DA1162 Locking Tool LRT-12-058 2.5D/200 & 300Tdi - 12 piece Flywheel Locking Tool Timing Pins For use with DA1120 on 3.0 TdV6 engines Defender - 2007 onwards LRT-12-058 Land Rover tool part number - 303-698 Timing pin (short) - Td5 engines LRT-12-158 Timing pin (long) - Td5 engines DA6129 DA6124 Timing Kit Timing Kit DA6116 Range Rover P38 - BMW diesel Range Rover Sport - 3.6 TdV8 Timing Kit Specifically designed for the 2.5 TDS diesel Range Rover L322 - 3.6 TdV8 Freelander 1 - TD4 - M47 - 2000 - 2006 engines. This timing tool includes crankshaft Designed to lock the camshaft and crank- Range Rover L322 - Td6 - 2000 - 2006 holding tool, timing chain compressor, shaft in their timed position when performing This set enables the correct timing to be injection pump puller, shaft puller, crankshaft DA6112 engine rebuild or changing the cam chain. made when servicing the BMW M47 2.0 16 alignment pin, camshaft alignment tool & Timing Kit Packed in a foam tray and etatin. Made engines. tensioner locking pins. Defender - 2.4 TDCi in Sheffield. Timing tool kit including timing pump Equivalent to removal and installation tools, camshaft/ OEM 303-1236 - camshaft alignment blocks crankshaft sprocket alignment pin, chain 2 x 2 + bolts tensioner, fuel pump cover removal tool and 303-1243 - flywheel locking plate fuel injection pump sprocket locking tool. 303-1239 - camshaft rotating pin Supplied in metal case with foam tray. 303-1238 - crankshaft timing pin DA1668 Timing Kit 2.0 diesel Ingenium AJ200 diesel engine Discovery Sport/Range Rover Evoque (2015 DA1847 onwards)/Jaguar F-Pace, XE, XF (2015 Timing Kit onwards)Engine codes: AJ-200D, 204DT, Developed to allow the safe removal and AJ200D, AJ200, 204DTD. replacement of the camshaft drive chains For locking the engine into the timed position and check the engine timing on the Range so the engine timing chain can be removed/ Rover and Range Rover Sport 4.4L diesel replaced and the engine timing checked. To engines. DA7539 NEW be used with fuel pump locking tool DA1667. >Engine codes include: Timing Kit DA1667 Equivalent to 448DT (Diesel V8 4.4L) AJ200 Ingenium Petrol Fuel Pump Locking/Removal Tool 303-1625 Camshaft holding tool > Equivalent to OEM Tools: JLR 303-1620, Discovery 5 - from 2017 2.0 diesel Ingenium AJ200 diesel engine 303-1631 Camshaft adjuster locking/ 303-1568, 303-1243, 303-1571 Discovery Sport - from 2017 Discovery Sport holding tool > Unique camshaft timing tool design - EU Range Rover Evoque - from 2017 Range Rover Evoque (2015 onwards) 303-1630 Crankshaft pulley locking tool registered design Range Rover Sport - from 2017 Jaguar F-Pace, XE, XF (2015 onwards). Range Rover Velar - from 2017 Engine codes: AJ-200D, 204DT, AJ200D, DA7364 NEW Kit contains all the essential components AJ200, 204DTD. TDV8 Crankshaft Position Sensor Ring required to lock the JLR 2.0l Ingenium petrol Locks the fuel pump sprocket and chain in Installer engines in their timed position so that the a fixed position while the pump is removed Range Rover Sport - TDV8 engine timing chain can be safely removed and replace. To be used with timing tool kit Range Rover - TDV8 and replaced and/or the engine timing DA1668. Equivalent to 303-1672. Designed to install the TDC position sensor checked. Made in Sheffield. Equivalent ring on the TDV8 diesel engines found in the to OEM JLR-303-1630, JLR-303-1635 & Range Rover and Range Rover Sport models. JLR-303-1636. Petrol engine codes: AJ-20/ It is critical that the sensor ring is fitted in the PT204, AJ-200/PT204, AJ-200P/PT204, correct position in relation to the crankshaft AJ200P, PT204 and AJ200. to ensure correct injection timing. Equivalent to OEM JLR-303-1237. DA3525 NEW Engine Locking Kit for V8 5.0L Discovery 4/Range Rover Sport/Range Rover Engine codes include: AJ-133/508PS and AJ-133/508PN. Timing tools to lock the camshafts and crankshaft in their timed positions. Designed specifically for use on the post 2010 V8 5.0L petrol engines used across the JLR range. This 7 piece kit includes the camshaft, crankshaft, flywheel locking tools and the special camshaft turning tools with the tensioning wrench required to work on the engines listed. Equivalent to OEM: 303-1482, 303-1445-1, 303-1447, 303-1445-5, 303-1303 & 303-1452. Made in Sheffield. 266