CHASSIS & BODY Galvanised & Stainless Steel Products Stainless Steel Products Direct Replacement Mudflap Brackets MTC3000SS MUC3986SS CAT500340PMASS Defender 90/110/130 MTC3000SS Front RHS MTC3001SS Front LHS Defender90 MUC3986SS Rear RHS MUC3987SS Rear LHS Defender 110/130 CAT500340PMASS* Rear RHS CAT500350PMASS* Rear LHS *Brackets can also be used with CAT500360PMA & CAT500370PMA as replacement brackets. These brackets are not available as stand alone brackets - they are DA4871 DA4871B only available to order along with the mudflap. DA4871B The universal number for the mudflap for all Defender 110/130 rear applications is BTR277. DA8200 Anti-luce Pin Kit DA4871 Mirror finish DA4871B Brushed finish A-post Trims Defender The A-Post Trims are designed to replace the existing trim and will cover the corner where they normally tear. The door threshers are made from stainless steel 304 grade bright annealed 1.5mm thick and are laser cut and CNC pressed. Includes fixings. Pair. MTC6332KIT Radiator Grille Bracket Kit Defender Stainless steel mounting bracket with air-con front panel brackets. Machine cut and CNC pressed for accuracy. Ready to bolt in place. DA1935 4 x No8 x 16mm A2 Pz2 screws 2nd Row Seat Belt Floor Mounting 2 x A4-70 No14 x 25mm Pz3 stainless steel Defender - CSW/Series - SW screws Pair. Made from stainless steel 304 grade 4 x M5 A4 flat washers 2mm thick and are laser cut. Fixings are 2 x M6 A4 flat washers included - 2 x M8 A4-80 x 20mm hex head bolts 4 x M12 A4-80 x 20mm hex head bolts 2 x M8 A4 flat washers 4 xM12 A4 flat washers & 4 x Rivets MTC6332BRKT NEW 4 x No6 plastic lock nuts Note - A4-80 is theequivalent of mild steel 8.8Radiator Grille Bracket 2 x No14 captive U nuts high tensile bolts Defender - 1987 - 2016 2 xM8 A2/304 captive nuts With air-con -Stainless steel Note - A4-80 is the equivalent of mild steel 8.8 Single high tensile bolts Photo by Corlius Jooste 231