ZONE 1 / ZONE 21 ZONE 2 / ZONE 22 ZONE 0 / ZONE 20 DISCOVER DISCOVER RELIABLE DETECTION DISCOVER DISCOVER ULTRA-SENSITIVE SITE PROTECTION TECHNICAL CHARACTERISTICS TECHNICAL CHARACTERISTICS Protection in hazardous locations with an exploision risk due to the presence of- flammable gases or vapours- combustible dusts or highly fl ammable fi bres Compliant with ATEX Directive 2014/34/UE as well as General Directive on all low voltage products 2014/35/UE Compliant with standards IEC EN 60079-0, IEC EN 60079-1 & IEC EN 60079-31 The site security manager must determine the zones with an exploision risk due to the presence of gas, vapours or dust, in order to put in place secure devices suited to these very specific environments. ATEX zones are classified according to their hazard level so that the most suitable ATEX detectors can be selected. ATEX ZONES GAZ / VAPOUR DUST Permanent or long periods of a potentially explosive atmosphere during normal operation. 1000 hours / year Very high-level protection Probable potentially explosive atmosphere Exposure between 10 and 1 000 hours/year or more Enhanced protection level Probable potentially explosive atmosphere Exposure between 10 and 1 000 hours/year or more Enhanced protection level Unlikely potentially explosive atmosphere surrounding... Exposure less than 10 hours / year Typical protection level Unlikely potentially explosive atmosphere surrounding... Exposure less than 10 hours/ year Typical protection level ZONE 0 (Gaz) / ZONE 20 (Dust)) ZONE 1 ZONE 21 ZONE 2 ZONE 22 PIRAMID ATEX COMPATIBLE PIRAMID ATEX COMPATIBLE PIRAMID ATEX COMPATIBLE PIRAMID ATEX COMPATIBLE Volumetric detector with multiple settings: Sensitivity setting: minimum movement of target required to trigger an alarm Range setting: 3m to 30m False alarm filtering:filtering of vibrations or movements (e.g.: vegetation, small animals...) PIRAMID ATEX is suitable for sensitive sites classified as Zones 1 and 2 for gaz and Zones 21 to 22 for dust: Oil rigs Petrochemical sites Seveso sites Hazardous material storage zoness ADAPTABILITY MAXIBUS-NEO COMPATIBLE Centralisation of all alarm information in a single point Four independent communication ports (each port is compatible with all SORHEA products) Management and remote maintenance of sensors Optimised detection for each zone to be protectedthanks to a combination of technologies OPTIMISED ALARM MANAGEMENT... VMS integration: Milestone, Genetec RSA, Qognify/Cayuga, Avigilon, ExacqVision Transmission of the event to the Alarm Receiving Center in real time (integrated «push» mode), for automatic, instant and qualified video qualification Compatibility: native integration with remote monitoring reception platforms - ESI, AzurSoft, Immix... ...DESIGNED FOR SIMPLIFIED INTEGRATION ON ALL YOUR SITES See in details See in details TECHNICAL CHARACTERISTICS PIRAMIX ATEX Input voltage 12 to 24 V DC Consumption 150 mA at 12 VDC (LED OFF) RF power density Maximum 120 uW / cm² in front of device Weight 12 kg Operating temperature -35 ºC to +70 ºC Protection index IP66 in accordance with EN 60529 and IEC 60529 Mechanical strength IK10 in accordance with EN 50102 Relay contact capacity 0,1 A / 50 V Microwave Factory set to one of the following frequencies 10,587 MHz USA 10,587 MHz International 9,900 MHz International 9,470 MHz International Electrical cabling International housing provided with NPT ½” thread and cable gland for unarmoured cables Diameter 5.5 mm to 8 mm Diameter 8 mm to 10.5 mm Diameter 10.5 mm to 13 mm