1 sensor per panel Cladding brackets Inert cable for passing gates DISCOVER DISCOVER Zoning CONFIGURABLE (G-FENCE 600Z) DISCOVER DISCOVER SYSTEM DESCRIPTION MAXIBUS-NEO COMPATIBLE MAXIBUS-NEO COMPATIBLE TECHNICAL CHARACTERISTICS TECHNICAL CHARACTERISTICS Cable highly resistant to bending and traction Standard cable: quick and simple repair in case of a cut cable Quick and easy installation (cable, sensor and Control Unit) LED integrated to the sensor: user-friendly configuration of sensitivity and maintenance (defect localisation) Localisation of cable cutting to 3 m Suited to all types of support… Installation inside or outside possible Warehouse cladding application: detects attempts at cutting, removal or perforation of cladding panels Embedded web server Broad range of cable sensitivity settings Multiple system configuration:- Number of impacts- Sensitivity settings Time and history log: localisation of triggered sensor Real-time visualisation of system status Accurate localisation to each fence pannel REMOTE CONFIGURATION AND MAINTENANCE Cable protected in protective tube for installations on concertina / barbed wire OPTIONAL REINFORCED CABLE Simple configuration tool Possibility to configure one sensor or multiple sensor zones Up to 10 detection zones for G-FENCE 600Z 2 zones for G-FENCE 600 Up to 600 m of protection per system Up to 200 m of inert cable can be added per section Highly insensitive to weather conditions: heavy rain, fog, wind Resistant to electromagnetic environments 2 models in the range: - Version 600: 4 alarm contacts and 2 configurable zones - Version 600Z: 12 alarm contacts and 10 configurable zones SYSTEM DESCRIPTION MAXIBUS-NEO COMPATIBLE Centralisation of all alarm information in a single point Four independent communication ports (each port is compatible with all SORHEA products) Management and remote maintenance of sensors Optimised detection for each zone to be protectedthanks to a combination of technologies OPTIMISED ALARM MANAGEMENT... VMS integration: Milestone, Genetec RSA, Qognify/Cayuga, Avigilon, ExacqVision Transmission of the event to the Alarm Receiving Center in real time (integrated «push» mode), for automatic, instant and qualified video qualification Compatibility: native integration with remote monitoring reception platforms - ESI, AzurSoft, Immix... ...DESIGNED FOR SIMPLIFIED INTEGRATION ON ALL YOUR SITES See in details See in details TECHNICAL CHARACTERISTICS SYSTEM G-FENCE 600 Control Unit – 4 alarm outputs – Outdoor / Indoor installation G-FENCE 600Z Control Unit –12 alarm outputs – Outdoor / Indoor installation Roll of 100 m G-FENCE 600 detection cable, including 40 sensors UR / UT G-FENCE 600 Plastic or metal tie wraps available Power / charger 110/230 V AC 50 / 60 Hz 13.6 V DC / 2.2 A 12 V DC battery 1.2 A / H for supply G-FENCE 600 & 600Z Power supply 12 Vdc Alarm information G-FENCE 600 (4 alarm contacts) Control Unit (UG) Detection zone System Tamper 1 intrusion per detection zone (2 in total) Perimeter defect (cut cable) G-FENCE 600 Z (12 alarm contacts) Tamper 1 intrusion per detection zone (10 in total) Perimeter defect (cut cable) Maximum length of detection cable 100 m (40 sensors) Maximum protection per UG 600 m Operating temperature -40 ºC to +70 ºC Electromagnetic compatibility Compliant with European standards (CE label) Installation recommendations 1 sensor per panel – up to total of 200 m of inert cable (per section of detection cable) Configuration Automatic calibration – Sensitivity setting per sensor or per section Number of impacts per zone setting Remote maintenance Embedded web server 8-INPUT REMOTE MODULE Alarm information 8 dry inputs + Tamper Alarm transmission Either by dynamic mesh radio network to radio coordinator Or by wired network RS 485 Radio frequency Frequency band 868 MHz, 19 selectable channels, LoRa modulation Data encryption AES 128 bits Power supply Range 4 V DC – 26 V DC (consumption 10 mw at 4 V DC) Operating temperature -40 ºC to +70 ºC Electromagnetic compatible Compliant with European standards (CE label) Local wireless configuration via smartphone applications Applications available for all smartphones: Control Unit controls the 600 m detection cable divided into 2 sections each with a maximum distance of 300 m Control Unit UT / UR Detection cable UT / UR