SPECIFICATION 4 To optimize detection, the sensor must be placed in the middle of the panel. SPECIFICATION 5 Do not install a control unit in front of a hedgerow or in a shaded area to avoid hiding the solar panel. SPECIFICATION 6 Entrances and gates: use at least a 0.6mm² standard cross-section cable with a maximum length of: 200m for G-FENCE 600 and 600-Z and 50 m for G-FENCE 3 000. SPECIFICATION 7 Indoor installation is possible. Application for the detection of siding impacts, attempts to cut the fence, torn and punctured siding panels. INSTALLING THE SENSOR AT THE CENTER OF THE FENCE PANEL AVOID INSTALLING THE CONTROL PANEL IN A SHADED AREA USE STANDARD CABLE FOR ENTRANCES AND GATES ONE SENSOR PER SIDING PANEL