DIAGRAM KEY Power supply DISCOVER DISCOVER REPULSION CONFIGURATION DISCOVER DISCOVER OPTIMISED DEPLOYMENT MAXIBUS-NEO COMPATIBLE via MI8 MAXIBUS-NEO COMPATIBLE via MI8 TECHNICAL CHARACTERISTICS TECHNICAL CHARACTERISTICS Optimised solution thanks to the combination of 4 functions: - deterrence: dissuassive effect of electrifi cation- physical protection: double-skin effect due to the combination of fences- detection: alarm triggered by touching, short circuit and cutting off Safe installation for the public thanks to a 12cm gap between the perimeter fence and the electrifi ed fence Simultaneous triggering of an alarm and the repulsion function Unaffected by weather conditions (strong wind, rain, snow, cold...): very low rate of unwanted alarms SILUR system patented under: No 18176459.8 – 1206 Compliance with electrification regulations and standards:- decree 96 216 of March 14, 1996- standard NF EN 60 335-2-76 APAVE certified system Approval by various ministries (justice, home office, defense) 360° head Detection ensured by adding taut, electrifi ed wires: any attempt at climbing, cutting or tearing will be detected Two patented technologies for two electrifi cation systems are available: - FX technology: two-wire gap detection- 360° technology: patented innovation that detects a force being applied on a wire Upper detection: overhang mounted systems equipped with a 360° head HIGH-PERFORMANCE DETECTION SILUR 360 SILUR FX Selection of shock intensity according to the site: between 2.3 and 3.5 Joules Activation or deactivation of repulsion: - detection / repulsion mode: high voltage between 5500 and 7500 V - low voltage detection option (24V) Control of the operating mode: - detection and repulsion: high voltage mode upon site closure - low voltage detection when the site is open to the public (no repulsion) Installation on all types of fences Protection of the whole perimeter: gates included in the electrification zone (any type: sliding, swinging) No structural work is required to install the system: simple installation on the existing perimeter fence of the site The System is delivered ready to install:factory-assembled pantographs 800 m of protection per energiser Possible deployment in one or two detection zones per energiser OPTIMISED DEPLOYMENT MAXIBUS-NEO COMPATIBLE via MI8 Centralisation of all alarm information in a single point Four independent communication ports (each port is compatible with all SORHEA products) Management and remote maintenance of sensors Optimised detection for each zone to be protectedthanks to a combination of technologies OPTIMISED ALARM MANAGEMENT... VMS integration: Milestone, Genetec RSA, Qognify/Cayuga, Avigilon, ExacqVision Transmission of the event to the Alarm Receiving Center in real time (integrated «push» mode), for automatic, instant and qualified video qualification Compatibility: native integration with remote monitoring reception platforms - ESI, AzurSoft, Immix... ...DESIGNED FOR SIMPLIFIED INTEGRATION ON ALL YOUR SITES See in details See in details TECHNICAL CHARACTERISTICS SILUR FX SILUR 360 Detection Technology FX technology: detection by an attempt to open the gap between 2 wires 360 technology: detection by applying a force on a wire Number of detection wires* 19 wires covering a height of 2.40 m 14 or 16 wires covering a height of 2.40 m (standard) Detection head 1 detection head (360° technology) at the top of the overhang Up to 16 detection heads possible (360° technology) covering a height of 2.40 m Overhang Embedded in the system (for anti-intrusion function) Patent Patented SILUR system: No 18176459.8 – 1206 Compliance with electrification regulations and decrees In compliance with Decree 96 216 of 14th March 1996 and Standard NF EN 60 335-2-76 Certifications APAVE certification and approval from various ministries (justice, home office, defense) Assembly Factory assembled system - Delivered ready to install *Other densities available on request SI-BOX CENTRALISED CONTROL SYSTEM SI-BOX-1Z SI-BOX-2Z Secured perimeter length 800 m Repulsion voltage from 5500 V to 7500 V (depending on the perimeter length and the number of electrified wires) Low voltage option 24 V Consumption 60 Watts maximum Shock delivered 2,3 J 3,5 J Electrification zones 1 zone 2 zones Power supply 230 Vac Alarm outlets Dry contacts UMAXIBUS-NEO Compatible via MI8 for VMS integration