Inert cable for passing gates Cladding brackets 1 sensor per panel DISCOVER DISCOVER MULTIMODE ALARM TRANSMISSION DISCOVER DISCOVER REMOTE MANAGEMENT MAXIBUS-NEO COMPATIBLE MAXIBUS-NEO COMPATIBLE TECHNICAL CHARACTERISTICS TECHNICAL CHARACTERISTICS Up to 600 m of protection per Control Unit (UG) UG compatible with MAXIBUS-NEO: up to 4 UG per communication port, or 2400 m of protection per communication port Up to 200 m of inert cable can be added per section 12 alarm contacts and 10 configurable zones Highly insensitive to weather conditions: heavy rain, fog, wind Resistant to electromagnetic environments UG compatible with G-FENCE 600/600Z cables Cable highly resistant to bending and traction: easy to install Standard cable: quick and simple repair in case of a cut cable Quick and easy installation (cable, sensor and Control Unit) LED integrated to the sensor: user-friendly configuration of sensitivity and maintenance (defect localisation) Localisation of cable cutting and intrusion to 3 m Suited to all types of support… Installation indoors or outdoors possible Warehouse cladding application: detects attempts at cutting, removal or perforation of cladding panels No software required: embedded web server Simple and intuitive web interface Broad range of cable sensitivity settings Multiple system configuration:- Number of impacts- Sensitivity settings Possibility to configure one zone per sensor and up to 10 detection zones per UG MULTIPLE SETTINGS AND ZONING Cable protected in protective tube for installations on concertina / barbed wire OPTIONAL REINFORCED CABLE 12 dry contact outputs (1 tamper, 1 technical defect and 1 per zone) Modbus TCP/IP output from the Control Unit: direct integration with VMS via API MAXIBUS network output: MAXIRIS, PIRAMID, MI8 compatible All these alarm information transmission modes are available simultaneously Remote configuration via MAXIBUS or via Control Unit on IP network Remote maintenance:- Time and history log: localisation of triggered sensor- Real-time visualisation of system status, intrusion localisation... Control Unit updating:- locally via SD card- remotely via Control Unit web interface or MAXIBUS Optimisation of implementationand maintenance times REMOTE MANAGEMENT MAXIBUS-NEO COMPATIBLE Centralisation of all alarm information in a single point Four independent communication ports (each port is compatible with all SORHEA products) Management and remote maintenance of sensors Optimised detection for each zone to be protectedthanks to a combination of technologies OPTIMISED ALARM MANAGEMENT... VMS integration: Milestone, Genetec RSA, Qognify/Cayuga, Avigilon, ExacqVision Transmission of the event to the Alarm Receiving Center in real time (integrated «push» mode), for automatic, instant and qualified video qualification Compatibility: native integration with remote monitoring reception platforms - ESI, AzurSoft, Immix... ...DESIGNED FOR SIMPLIFIED INTEGRATION ON ALL YOUR SITES See in details See in details TECHNICAL CHARACTERISTICS G-FENCE 2400 Power supply 12 - 24 Vdc Alarm information Control Unit (UG) Detection zones System Tamper 1 intrusion per detection zone (10 in total) Perimeter defect (cut cable) Alarms outletss Dry contacts, network output to MAXIBUS-NEO, ModBus, API Maximum length of detection cable 100 m (40 sensors) Maximum protection per UG 600 m Integrated Heating From -40°C up to + 70°C Electromagnetic compatibility Compliant with European standards (label CE) Installation recommendations 1 sensor per panel – up to total of 200 m of inert cable (per section of detection cable Configuration Sensitivity setting per sensor or per section Number of impacts per zone setting Remote maintenance Embedded web server Extreme climate housing option IP 65 housing and removable terminal blocks MAXIBUS-NEO HUB Configuration tools Embedded web server Alarm output Dry contacts / ModBus / API 4 communication ports 4 Control Units per communication port Power supply 12 Vdc Operating temperature 0° C à +55° C Security Compatible networks 802.1X & TLS...