INSTALLATION SPECIFICATIONS SHOCK DETECTION CABLES INTRUSION DETECTION BY FENCE CABLE SPECIFICATION 1 Installing a sensing cable halfway up the fence with the supplied cableties and to fix a sensor by tightening one of the cable ties on the fence mesh. SPECIFICATION 2 For wire mesh installations, make sure that the mesh is properly tensioned. In windy conditions, it should not flap against the tensioning wires and poles. It must be properly secured to guarantee a stable detection. SPECIFICATION 3 Installing 2 sensors on the panels equipped with Control Units. ABOUT G-FENCE PROPER INSTALLATION OF THE CABLETIES 1ST AND 2ND CABLETIES POSITIONED AT THE RIGHT DISTANCE FROM THE SENSOR, AT THE INTERSECTION WITH A MESH OF THE FENCE FAULTY INSTALLATION OF CABLETIES 1ST CABLETIE POSITIONED TOO FAR AWAY FROM THE SENSOR 2ND CABLE TIE NOT POSITIONED AT THE INTERSECTION WITH A MESH OF THE FENCE STANDARD INSTALLATION ON A FENCE PANEL WITH CONTROL UNIT SENSOR 1 DETECTION CABLE 2 CONTROL PANEL SENSOR 1 DETECTION CABLE 1