MOUNTING ACCESSORIES Ducting, reduction elements and duct joining piece TUBPLA ESTANCO – V SERIES Complete rectangular and circular duct range of accessories, equipped with a EPDM joint that gives an excellent tightness to the set. By avoiding leakages, the consumption and noise of the fan is reduced, improving the benefi ts of the installation for the user. With a plug-on assembly, the installation time is 60%reduced in front of solutions without sealing, because no adhesive tape nor PCV glue is needed. The system has a class D tightness, the maximum category according to European normative EN 12237. Plug-on assembly without needing of any sealing product. CLASS D TIGHTNESS TUBPLA SOUND ATTENUATOR- TPA Sound attenuators adapted to TUBPLA 100 and 150 dimensions. Different lengths: 0.5, 1 and 1.5 meters. ESTANCA version: TPA V. Sound atenuation in Pa (55x200 model) Pressure drop in Pa (55x200 model) Length of sound 63Hz 125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz Length of sound 54 m/h 105 m/h 210 m/h 3 3 3 attenuator attenuator 500 mm -1 -3 5 6 12 18 12 9 500 mm 10,5 18,5 100 1.000 mm -1 0 11 12 13 37 23 15 1.000 mm 10,5 17,2 107 1.500 mm 5 6 16 20 32 47 35 20 1.500 mm 8,2 23,5 107 TUBPLA V Series - Rectangular tight accessories TUBPLA V Series - Rectangular standard accessories Ø125 Ø100 Ø125 Ø100 55x220 mm 55x110 mm 55x220 mm 55x110 mm TPA 125 0,5M TPA 100 0,5M TPAV 125 0,5M TPAV 100 0,5M TPA 125 1M TPA 100 1M TPA 125 1,5M TPA 100 1,5M 52 Mounting accessories www.solerpalau.com