ELECTRICAL ACCESSORIES Intelligent elements for demand controlled ventilation CPFL-S / CPFL-E CPFL Presence detector for ceiling mount, sensitive to infrared radiation emitted by bodies in movement, with a 360º detecting angle. Power supply: 1-230 V. CPFL-S: Surface model. CPFL-E: Flush mount model. Model Electrical Power Settings Height IP Operating Surface mount supply (W) installation Protection temperature range 105 Timing 5s-15 min 0ºC to +45ºC max 95% CPFL 230V-50Hz 1,2 Luminosity 5-1000 lux 2,5-3,5 m IP21 HR without condensation 87* Use of the presence detector Installed height (m) Diameter of the detection zone at the floor (m) 2,5 6,4 3 7,7 3,5 9 Flush mount 90 72 * Distance between mounting holes. REMP Motorised dampers open proportionately and is controlled by the EAS control module. Power supply: 24 VAC or 24 VD, depending on the models. Model Diameter Length Axle diameter Motor height (mm) (mm) (mm) (mm) REMP-160 160 200 8 80 REMP-200 200 200 8 80 REMP-250 250 200 8 80 REMP-315 315 300 12 80 REMP-355 355 300 12 80 REMP-400 400 400 12 80 REMP-450 450 400 12 80 Model Electrical Power Entry Time of IP Protection Operating supply (W) answer temperature range 24V-50/60Hz 1 (ON) max. 150s on -10ºC to +50ºC REMP 24VDC 0,4 (OFF) 0-10V proportional having opened I P54 maximum 95% HR or to closed without condensation 100 Electrical accessories www.solerpalau.com 22 69 55