Inert cable for passing gates Control Unit UG The essentials SHOCK DETECTION CABLES G-FENCE 3000 FENCE-MOUNTED SHOCK DETECTION SYSTEM AUTONOMOUS DISCOVER DISCOVER SIMPLIFIED INSTALLATION AND MAINTENANCE DISCOVER DISCOVER DISCOVER DISCOVER DISCOVER DISCOVER ADJUSTABLE SOLUTION INTRUDER LOCALISATION OPTIONAL REINFORCED CABLE Cable highly resistant to bending and traction: easy to install Standard cable: quick and simple repair in case of a cut cable Quick and easy assembly (cable, sensor and Control Unit) LED integrated with the sensor: user-friendly configuration of sensitivity and maintenance (defect localisation) Localisation of cable cutting to 3 m Broad range of cable sensitivity settings Multiple system configurations: - Number of impacts per sensor- Number of sensors (detection on 2 or 3 adjacent sensors)- Sensitivity settings per sensor ADJUSTABLE SOLUTION Cable with integrated sensor: analysis all along the protected perimeter Accurate localisation to each fence panel Up to 3200 m of protection per communication port 4 x 3200 m of protection per system for maximum protection INTRUDER LOCALISATION Cable protected in a protective tube for installations on concertina / barbed wire OPTIONAL REINFORCED CABLE Simple configuration tool Possibility to configure one sensor or multiple sensor zones Creation of detection zones: up to 128 zones Solar energy power: integrated solar panel (or optional 12 V DC) Up to 2 months autonomy in total darkness low battery alarm Up to 200 m of protection per CU 2 auxiliary inputs per UG for external alarms Highly insensitive to weather conditions: heavy rain, fog, wind MAXIBUS-NEO COMPATIBLE Centralisation of all alarm information in a single point Four independent communication ports (each port is compatible with all SORHEA products) Management and remote maintenance of sensors Optimised detection for each zone to be protectedthanks to a combination of technologies OPTIMISED ALARM MANAGEMENT... VMS integration: Milestone, Genetec RSA, Qognify/Cayuga, Avigilon, ExacqVision Transmission of the event to the Alarm Receiving Center in real time (integrated «push» mode), for automatic, instant and qualified video qualification Compatibility: native integration with remote monitoring reception platforms - ESI, AzurSoft, Immix... ...DESIGNED FOR SIMPLIFIED INTEGRATION ON ALL YOUR SITES See in details See in details TECHNICAL CHARACTERISTICS SYSTEM G-FENCE 3000 Control Unit Roll of 100 m G-FENCE 3000 detection cable, including 40 sensors UR / UT G-FENCE 3000 Plastic or metal tie wraps available (pack of 1000) MAXIBUS-NEO - 8 relay outputs available with the option of adding up to 16 extension cards of 8 additional relays MAXIBUS-NEO - Power / charger 100/230 V AC 50/60 Hz 13.6 V DC / 2.2 A for MAXIBUS-NEO MAXIBUS-NEO -12 V DC battery 1.2 A / H for power G-FENCE 3000 Power supply Panneau solaire et batterie dans chaque Unité de Gestion (UG) Ou option 12 Vdc Alarm information Control Unit (UG) Detection zone System • Tamper • Low battery • AUX.1 input • AUX.2 input 1 intrusion per detection zone • Perimeter defect (cut cable) • Communication defect (cut Bus) Maximum length of detection cable 100 m (40 sensors) Maximum protection per UG 200 m Maximum length of system per MAXIBUS Universal 4 x 3200 m (i.e., 12.8 km) Operating temperature -40 ºC to +70 ºC Electromagnetic compatible Compliant with European standards (CE label) Installation recommendations 1 sensor per panel Configuration Automatic calibration Sensitivity setting per zone Number of impacts setting Number of adjacent detector sensors setting MAXIBUS-NEO HUB Configuration tools Embedded web server Alarm outputs 8 to 136 dry contacts, Modbus TCP, Modbus RTU, API 4 communication ports Can manage 4 x 3200 m simultaneously Power supply 12 Vdc Operating temperature 0 ºC to +55 ºC Security Compatible networks 802.1X & TLS Control Unit UT / UR Detection cable MAXIBUS-NEO