BENEFITS AND MAINTENANCE / BATHTUBS AND SHOWER TRAYS / GELCOAT The main component of gelcoat shower trays is limestone, which in conjunction with resins gives the possibility of creating a product with a subtle minimalist design or white matte with a slate texture in appearance.. ADVANTAGES OF THE MATERIAL the shower trays smooth surface ensures highly hygienic environment the surface is easy to clean and maintain the material is resistant to mechanical damage and UV radiation i n case of surface damage the product can be repaired thanks to the low height of the product, it can be installed both on the floor and together with the floor“ available in two variants: white glossy and white matte with a slate texture ACRYLATE ADVANTAGES OF THE MATERIAL acrylic products of Jika brand are made of 100% acrylate warm surface and good insulation properties colour stability easy maintenance STEEL Jika steel bathtubs are produced from a steel strip with a thickness of 1,5 to 1,8 mm or 2,5 to 2,8 mm. After shaping on special presses, 3 layers of enamel are applied to the material. Each layer of enamel is then fired in a furnace. ADVANTAGES OF THE MATERIAL Jika steel products made of enamelled steel are hygienic, resistant to acids, scratches as well as abrasion i t is not subject to change of colour or shape practically unlimited lifetime if properly maintained MAINTENANCE AND CLEANING The surfaces, which the bathtubs and shower trays are made of, are not difficult to clean and care. Smooth surface barely catches dirt. For regular maintenance, we recommend using a sponge, a soft cloth and a small amount of antistatic detergent. Avoid using abrasives or solvents that damage the product surface. Remove strong dirt by a household liquid cleaner such as dishwashing detergent or soap. In the event of damage to the product surface, repair is possible using a repair kit. The surface should always be repaired by a specialist only. Hard neutral Cl soft