Creativity should have the chance to materialize. Do you need to know how to take measurements or maintain our chains properly? Find it out in this section. Cleaning and maintenance Project measurements INSTALLATION Projects can have any size in terms of both height and width. The material is supplied according to the measurements provided by the client. Measurements should always include the rail and the mounting system. Due to the size of the links and the separation between them, the measurements may not be exact, although they will be close to the height and width requested, without exceeding them, as much as technically possible. Installation is simple and doesn’t require specialized personnel, but you do have to check that the structure where the chains will be installed can bear their weight. To achieve the best effect with the chain, we recommend leaving 1” (2 cm) free at the bottom. To keep the finish in the best condition, the following procedure is recommended: In case of light soiling, rub with a clean cotton cloth. If the chain is heavily soiled, clean with water and mild detergent (ph below 8), rinse with water and allow to air dry or wipe with a dry cloth. For large, heavily soiled surfaces, it is recommended to use a pressure washer with water or mild detergent. Rinse with water and allow to air dry or wipe with a dry cloth. Avoid using abrasive materials that could scratch the surface of the chain.