LAUFEN INSTALLATION SYSTEM TW1 Concealed frame with cistern for wallhung WC 89466.3 TECHNICAL DATA Order no. 89466.3 Tank Thickness 110 mm, material PP Certified to EN 14055 Installation depth 125 mm matching for All LAUFEN wallhung toilets Weight 8,5 kg Specifications For mounting on brick wall (not suitable for Mounting acc. incl. Fastening set for the wall, WC connection set, drywall or concrete installation), wall mounting,tiling set, protection caps (for WC connection with frontal actuator, with water condensationpipes) and protection tubes for M12 threaded insulation. rods, angle valve 1/2”. Dual-Flush 6/3-l (4,5/3-l-flush). Accessories excl. Actuator plates dual flush, order no. 89566.1, Flush valve with silicon seal. 89566.2 (stainless steel) Fill valve with anti-siphon system. Electronic actuator plate dual flush, Other specifications Galvanized supporting "U-shaped" with fixing order no. 89566.3,89566.4 points adjustable to the wall. Mounting information Please note the necessary wall thickness of 80 mm Supporting frame made of steel profiles. in case of pre-wall installation. Height from Capable to resist 400 kg finished floor to top of WC pre-set to 400 mm, Water inlet top or rear R 1/2”, brass adjustable between 390-450 mm. Outlet DN 90/110 System installation is also possible between Flow pressure range 0.5-10 bar modular walls (plasterboard). Water temperature max. 25°C Colours Surface powder coated grey TECHNICAL DRAWINGS / S 1 : 20 450 50 63 12525-75 R /“ R /“ R /“ 1000 230 180 ±0 ±0 Z 170820 08010230770902255354010001