LAUFEN INSTALLATION SYSTEM CW3 Concealed self-supporting frame with cistern for wallhung WC 89466.2 TECHNICAL DATA Order no. 89466.2 Installation depth 160 mm Certified to EN 14055 Weight 22,0 kg matching for All LAUFEN wallhung toilets Mounting acc. incl. Fastening set to floor and wall, WC connection Specifications For self-supporting installation on a drywall set, tiling set, protection caps (for WC connection construction, support wall is not needed, pipes) and protection tubes for M12 threaded with frontal actuator, with water condensation rods, angle valve 1/2”. insulation. Accessories excl. Actuator plates dual flush, order no. 89566.1, Dual-Flush 6/3-l (4,5/3-l-flush). 89566.2 (stainless steel) Flush valve with silicon seal. Electronic actuator plate dual flush, Fill valve with anti-siphon system. order no. 89566.3,89566.4 Other specifications Galvanized leg supports, Support bar for handle and holding systems, height-adjustable 0-200 mm. order no. 89266.7, 89266.8 Self-supporting frame made of steel profiles. Mounting information Please note the necessary wall thickness of 80 mm Capable to resist 400 kg in case of pre-wall installation. Height from Water inlet top or rear R 1/2”, brass finished floor to top of WC pre-set to 400 mm, Outlet DN 90/110 adjustable between 390-450 mm. Flow pressure range 0.5-10 bar System installation is also possible between Water temperature max. 25°C modular walls (plasterboard). Tank Thickness 110 mm, material PP Colours Surface powder coated blue TECHNICAL DRAWINGS / S 1 : 20 500 50 63 25-75 R /“ R /“ R /“ 1000 230 180 ±0 ±0 0-200 0-200 160 Z 161108 021102302255354010001